best way how to start? (noob question)
Moderator: Admin
I like the firefly! Cool round version of the original.
Titanium wall looks a bit weird to me (I think CWS also means the titanium wall with its dark/dirty corner...)
Rockford's head now looks a bit flat with the bleu line around his neck.
In general, I wonder how the graphics look when the dirt color is lighter than the titanium wall color. In particular, Rockfords shade effects around his head would look too light, in my imagination...
Titanium wall looks a bit weird to me (I think CWS also means the titanium wall with its dark/dirty corner...)
Rockford's head now looks a bit flat with the bleu line around his neck.
In general, I wonder how the graphics look when the dirt color is lighter than the titanium wall color. In particular, Rockfords shade effects around his head would look too light, in my imagination...
---- Boulder Dash Fansite ----
for compare rockford to original.
has pronounced blue trousers, neck, sox, has the antenna on the head when it runs like when do not move, still T-shirt with stripes.. overall, it is smoother.
titanium walls. best looking for me from view to whole concept is the enhanced version with color 1. original is very flat. and it's a matter of color palette choice how the cave, walls, rocks, dirt looks.
has pronounced blue trousers, neck, sox, has the antenna on the head when it runs like when do not move, still T-shirt with stripes.. overall, it is smoother.
titanium walls. best looking for me from view to whole concept is the enhanced version with color 1. original is very flat. and it's a matter of color palette choice how the cave, walls, rocks, dirt looks.
I meant my last remark differently. A designer of caves has freedom to set colors. So color 1 can be darker than color 2 or vice versa. I wonder how your designs look when all pink becomes blue and all blue becomes pink.
In particular, the (blue) shades around Rockfords head. When blue and pink are reversed, these won't look like shades anymore, right?
Rockford looks better without blue neck! I still find the walking animation a bit weird. I would prefer a version without turning head. Just my opinion
In particular, the (blue) shades around Rockfords head. When blue and pink are reversed, these won't look like shades anymore, right?
Rockford looks better without blue neck! I still find the walking animation a bit weird. I would prefer a version without turning head. Just my opinion
---- Boulder Dash Fansite ----
- LogicDeLuxe
- Member
- Posts: 638
- Joined: Sun Jul 15, 2007 12:52 pm
- Contact:
That's also an issue with the original charset. It is clearly designed with certain steps in brightness. Especially the original diamond and butterfly stripes aren't at all smooth when the colors are swapped. That's why I changed the colors in my version of the Enemydesigner to match the brightness order of the original Boulder Dash. Also my Crazy Light Construction Kit honors this order of brightness when you create a new cave or when you let it choose some random colors.Arno wrote:A designer of caves has freedom to set colors. So color 1 can be darker than color 2 or vice versa.
I second this. The original animation seems smoother to me.Arno wrote:Rockford looks better without blue neck! I still find the walking animation a bit weird. I would prefer a version without turning head. Just my opinion
So far, amoeba, dirt, walls, fireflies, butterflies and diamonds look fantastic, imho.
But I liked the earlier titanium wall design without the holes better. Those solid rock walls indicating more resistance then the brick walls, which is the whole point, I think. Putting holes in it looks ugly, imho.
yes, colors with detailed graphics must be selected carefully. therefore is brightest color char color (one of the low eighths), multicolor 1 medium color and multicolor 2 dark color. this must always be respected. also because of shadowing.
i saw on youtube a lot of boulder dash versions and in many cases cave colors was terrible. it did not look so good.
just out of curiosity.. if it would be possible(? please please add this to your Crazy Light Construction Kit @LogicDeLuxe) have more than one dirt tile, then this could also be done. (main and three others tiles for dirt. in fact, every single tile could be have more than one usable graphics element with same functionality. especially dirt and walls)
i saw on youtube a lot of boulder dash versions and in many cases cave colors was terrible. it did not look so good.
just out of curiosity.. if it would be possible(? please please add this to your Crazy Light Construction Kit @LogicDeLuxe) have more than one dirt tile, then this could also be done. (main and three others tiles for dirt. in fact, every single tile could be have more than one usable graphics element with same functionality. especially dirt and walls)
Last edited by netoper on Sun Jul 01, 2018 9:13 pm, edited 6 times in total.
Well, in C64 (fanmade) BD caves it is quite common that the titan.wall color is darker than the dirt color. That's why I wondered if netoper aimed at supporting those color schemes.LogicDeLuxe wrote:That's also an issue with the original charset. It is clearly designed with certain steps in brightness. Especially the original diamond and butterfly stripes aren't at all smooth when the colors are swapped.
For instance, the C64 port of the original Boulder Dash has broken the brightness "rule" (see cave A as an example, where the titan.wall is dark grey and the dirt is light brown / orange).
Less common are dark wall/amoeba or light background, and this indeed gives horrible cave colors sometimes.
I haven't checked if the original Atari BD version does respect the brightness steps, but it could well be.
---- Boulder Dash Fansite ----
- LogicDeLuxe
- Member
- Posts: 638
- Joined: Sun Jul 15, 2007 12:52 pm
- Contact:
The rule of original Boulder Dash is: amoeba always goes dark green and slime goes dark blue. Since the c64 doesn't have the same char mode which can set a separate amoeba/slime color just by setting a char attribute, they decided to set the walls dark green with it in all amoeba caves in BD1. They used a brighter wall color in all other caves. The CPU time wasn't sufficient to write all the color RAM, so they abandoned that idea, too.Arno wrote:Less common are dark wall/amoeba or light background, and this indeed gives horrible cave colors sometimes.
In BD2, they did a different approach to "solve" this. They invented the dirt mod, ie. they changed the amoeba/slime color to the main dirt color, and to make it more distinguishable, they swapped the dirt colors in all amoeba caves. The issue with that is they sacrificed dirt contrast to the boulders and titanium walls, which is why many fans didn't like that, but No One and Prof. Knibble obviously did, though. Even worse, Prof. Knibble forced the low contrast dirt for all caves in some games. I changed it back to the original dirt colors in my Deluxe Construction Kit since v2.6, and I also changed the amoeba graphics to the BD1 one and the slime graphics to the BD2 version at the same time, to give new games a more classic and more colorful appearance.
Also, to understand some limitations, another rule of original Boulder Dash was: no amoeba and slime in the same cave. This is because they share the same graphics, and it wasn't possible to give them different colors in the same cave. They even forced the official Construction Kit to only use one of them, eventhough the engine has no problem having both elements in the same caves. And infact, many caves made with hacked Construction Kits (or by exploiting glitches) did just that.
That would require a massive engine reorganization. So it won't happen.netoper wrote:just out of curiosity.. if it would be possible(? please please add this to your Crazy Light Construction Kit @LogicDeLuxe) have more than one dirt tile, then this could also be done. (main and three others tiles for dirt. in fact, every single tile could be have more than one usable graphics element with same functionality. especially dirt and walls)
The closest to this is XDC's ability to have both dirt versions (original and swapped color version) in the same cave, to give it some diversity. That's about it. I ran out of tiles, so there will be no features requiring additional graphics.
Things on my todo list:
- Fix Crazy Light Tools for JiffyDOS.
- Finish XDC some day.
- LogicDeLuxe
- Member
- Posts: 638
- Joined: Sun Jul 15, 2007 12:52 pm
- Contact:
That is possible since the 1stB engine. Prof. Knibble made it a separate set, so amoeba and slime no longer share the same graphics.netoper wrote:for amoeba and slime i use different color and animation.
Btw., the locked diamonds are blast resistant. So maybe your graphics for them should look somewhat more robust.
LogicDeLuxe wrote:Btw., the locked diamonds are blast resistant. So maybe your graphics for them should look somewhat more robust.
you have true. i have a lot of tiles for locked diamonds
my choice probably
maybe..
.. it's hard when I can not decide
EDIT: one question for Crazy Light Tools. is here some key shortcuts for select elements? or do i still have to choose it from menu? i try every key but only few keys make something. i tried SHIFT + 1..0 but nothing was happen, F keys nothing too.
Maybe the eyes should not move that far to the middle when walking and maybe you should use twice as animation frames for moving the eyes, maybe they are smoother then...Arno wrote:Rockford looks better without blue neck! I still find the walking animation a bit weird. I would prefer a version without turning head. Just my opinion
- LogicDeLuxe
- Member
- Posts: 638
- Joined: Sun Jul 15, 2007 12:52 pm
- Contact:
The menu it is. Are you using a mouse already? With a mouse, you can work significantly faster than with a joystick for sure.netoper wrote:one question for Crazy Light Tools. is here some key shortcuts for select elements? or do i still have to choose it from menu?
I introduced acid in Crazy Dream 3: http://www.boulder-dash.nl/bdgb/view_ga ... =crdream03
The idea was from Mini Boulder: http://www.gamebase64.com/game.php?id=4869&d=18&h=0
no, i use keyboard.LogicDeLuxe wrote:The menu it is. Are you using a mouse already? With a mouse, you can work significantly faster than with a joystick for sure.
everything i make on computer and winvice. i tried configure pc mouse in winvice but not work. (edit: ok. its working now and is much better)
is there a way to get the map from the charpad (i can export map bin data) to deluxe kit v3.0? on which $adress starting map data ($7010 - $737f(?) i can load exported data to memory via winvice monitor)? or with help from GDash.
one complete level (create good, fun and quality levels is not that easy )
https://youtu.be/WU4lcq5wJRo